Why Use A Painter's Pole?

Our super strong Camera Pole kits get you up high fast.

Easy and sturdy - You'll be taking photos in minutes.

You can easily take photos from way up! Get above the crowd, above the fence, and up in the air. With our Pixie Pole, there's no need to buy expensive equipment. It is stronger and easier to handle at 5’8” (172.7cm) when shrunk, but extendable to 18’(5.49m) with just a push of a button or two! Your photos with our pole will have a stunning perspective! Why our pole? Compare it to common painter’s poles. They go as high, but are flimsy, and difficult to put into your car, or even to carry around.

As you can see the Pixie Pole collapses to just 5 feet 8 inches (172.7cm), much less than the 8 foot painter's pole in the other hand.
How does it work? Very easily
Step 1: Attach the Pole Pixie Adapter to the Pixie Pole by screwing it onto the pole. The adapter is lightweight, easy to grip, and tightens even with more security with an Allen wrench that is included.
Step 2: Place resting plate on pole to protect camera if pole is dropped.
Step 3: Screw camera onto adapter or tilt mount. You are now ready to take some great photos.
 
Fast, easy, and you are up and running in minutes with our 3 piece camera pole kit. To purchase the pole, adapter, tilt mount, and resting plate (that's our 3 piece Pixie Pole Kit), click on the button below.

Pictured is a Canon G12 on our 3 piece Pixie Pole Kit.
The image to the left shows the strength of the Pixie Pole compared to a standard painter's pole. Both poles have a 2.5 pound weight attached to them. As you can see the painter's pole is bending under even that small amount of weight. Meanwhile the Pixie Pole is rigid. This is why we decided to carry the Pixie Pole for our customers who have valuable cameras and want a super strong pole to support them.

As you can see on the image to the left, the Pixie Pole uses super-strong hex aluminum. The first section that encases all the aluminum is 1.875 inch fiberglass. The next section is hex aluminum tubing that is 1.5 inches! Super strong and rigid for all your pole camera needs!
Pixie Pole Plus! We also want you to meet our newest pole, the Pixie Pole Plus that rises from 6'8" (2.03m) to 23' (7m). It too, uses our super-strong hex aluminum. Besides super strong, it is also stretches for those extra heights that your pole camera needs to reach!
 
The push buttons make it easy to extend and close. There is No twisting of the sections. Fully extended, the Pixie Pole Plus opens to 23ft (7m) while weighing 9 lbs (4kgs). It is always extended and closed while in a vertical position with the base/weight on the ground. It feels lighter as it is extended.
 
It is fast, easy, and you are up and running in minutes with this 3 piece camera pole kit. To purchase our new 23' pole, adapter, tilt mount, and resting plate (that's our new 3 piece Pixie Pole Plus Kit), click on the button below.